Project country and market
Product standards, saleable sizes, climate and expected demand.
LIGHTWEIGHT BLOCK PRODUCTION LINES
Lightweight Block Production Line
Compare CLC, NAAC, EPS and ceramsite lightweight block production routes, then select the capacity, raw-material preparation, moulding, curing, cutting, handling and automation required by the real project.
Delivery lead time: 40–50 working days.
Choose the block and process route before comparing machines
01
QUICK ANSWER
A lightweight block production line is a connected factory system, not one universal machine list. CLC uses physical foam, NAAC uses chemical aeration, EPS requires controlled lightweight-particle dosing, and ceramsite requires aggregate-specific preparation. Capacity and automation are calculated after the product and local materials are confirmed.
Four block routes with different material and process requirements
02
PRODUCT & PROCESS ROUTES
REAL CLC PROJECT CLC blocks
Preformed physical foam, controlled slurry mixing, non-autoclaved curing and cutting.
REAL NAAC PROJECT NAAC blocks
Aluminium-powder chemical aeration with non-autoclaved curing.
REAL EPS PROJECT EPS blocks
EPS storage, dosing and mixing configured around the approved block structure.
REAL CERAMSITE PROJECT Ceramsite blocks
Ceramsite grading, moisture and absorption reviewed before mixing and forming.
Connect every production stage to the same output target
04
COMPLETE FACTORY SYSTEM
01
Raw-material preparation
Storage, feeding, metering and material testing.
02Mixing and aeration
Physical foaming, chemical aeration or aggregate mixing selected by route.
03Moulding and curing
Mould quantity, circulation and curing positions sized to the cycle.
04Cutting and finishing
Horizontal and vertical cutting, peeling and project-specific finishing.
05Transfer and stacking
Safe billet and finished-block movement through the factory.
06Control and tooling
PLC, electrical cabinets, moulds and the confirmed automation scope.
Block construction
From finished blocks to site use
Construction references can help define the block format and handling requirements for a new manufacturing project.
Application reference
Block laying on site
The clip shows bedding material being spread and a block being positioned in a wall. Specify the block dimensions and joint system as part of your product plan.
Application reference
On-site block sizing
The clip shows a block being cut to fit on site. Discuss the required block sizes, product consistency and finishing needs when planning the production line.
The clips illustrate site activities. Material performance and installation details must be specified for the actual product and wall system.
Information HENGDE needs before preparing a line proposal
05
PROJECT INFORMATION
Target product
CLC, NAAC, EPS, ceramsite or another confirmed lightweight block.
Planned daily output
Saleable output, shifts and future expansion—not only nominal machine capacity.
Available raw materials
Sources, test data, photos and representative samples where possible.
05Factory conditions
Land, workshop, power, water, roads, lifting and storage.
06Automation and delivery scope
Labour, maintenance capability, installation, training and commissioning needs.
Compare real projects across the four lightweight block routes
06
REAL HENGDE PROJECT CASES
REAL HENGDE PROJECT Albania CLC block project
A 100 m³/day foam-concrete block line with real cutting equipment.
REAL HENGDE PROJECT Ordos NAAC block project
A 300 m³/day chemical-aeration, non-autoclaved block line.
REAL HENGDE PROJECT South Africa EPS block project
A 200 m³/day EPS self-insulating block line with real production media.
REAL HENGDE PROJECT Shaoxing ceramsite cutting upgrade
A real cutting-system upgrade for an existing ceramsite block line.
Solve capacity, raw-material and investment questions before ordering equipment
07
TECHNICAL GUIDES
01
Choose the right production-line capacity
Compare output, moulds, curing, cutting and factory constraints.
02Can local raw materials be used?
Review materials before formula and equipment confirmation.
03CLC vs NAAC production lines
Compare physical foaming and chemical aeration accurately.
04Reduce investment without sacrificing output
Protect the bottleneck and avoid buying disconnected equipment.
05What a complete block factory includes
Look beyond the mixer and cutter to the connected factory system.
Questions to answer before equipment selection
BUYER QUESTIONS
Which lightweight block production route should I choose?+
Choose from the required block, local materials, process capability, curing route, market requirements and project budget. CLC, NAAC, EPS and ceramsite are not interchangeable machine lists.
What capacities does HENGDE provide?+
Published block-line planning directions include 30, 50, 100, 200 and 300 m³/day. The final output basis and equipment are recalculated for the project.
Can one line make several types of lightweight blocks?+
Some equipment can be shared, but material preparation, aeration or lightweight-aggregate handling, moulds, curing and process controls may differ. Compatibility must be reviewed before the line is confirmed.
Can HENGDE assess local raw materials?+
Yes. HENGDE can review material information and samples before recommending the process and equipment direction.
Does HENGDE support installation and training?+
Installation, commissioning and operator training can be included according to the agreed project scope and site readiness.
Planning a New Production Line?
DISCUSS YOUR PROJECT
Get a Production Line Proposal Send the project country, target product, planned output and available raw materials for an engineering review.
Mixing equipment: a workshop view
The enclosed horizontal mixing unit shown here is one equipment example from HENGDE company materials. To select the mixing arrangement, provide your raw materials, intended product and required output. The photograph does not identify a model or establish its capacity or installed power.
Discuss your project
Tell us about your project.
A few details give our team the right starting point for your production line proposal.
Delivery lead time: 40–50 working days.
WhatsApp HENGDE+86 159 8637 7799Opens WhatsApp. No message is sent automatically.