LIGHTWEIGHT WALL PANEL LINE
Delivery lead time: 40–50 working days.
PROCESS ROUTELong-mould wall-panel forming · Product-specific tooling
Lightweight wall-panel line configuration. Explore the line visual, production stages, equipment configuration, project examples and installation support.
Get a Production Line Proposal
CAPACITY QUICK INFORMATION
CAPACITY & EQUIPMENT CONFIGURATION
SIX-STEP PROCESS
Meter powder, aggregate and water to the panel mix design.
Control the addition sequence and mixing time for uniform panel material.
Fill the long-mould configuration selected for the required wall-panel product.
Hold the panels until the specified demoulding condition is reached.
Coordinate dimensional cutting, edge slotting and reinforcement tooling with the selected panel configuration.
Turn, clamp and transfer the panels with handling equipment matched to their dimensions and strength.
COMPLETE EQUIPMENT CONFIGURATION
Review the equipment for each production stage. Select an equipment image to enlarge it, or open a linked equipment name for more detail.
| No. | Equipment | Stage | Model | Dimensions | Qty. | Unit power | Total power (kW) |
|---|---|---|---|---|---|---|---|
| Preparation & metering | |||||||
| 1 | Preparation & metering | HDSL-001 | 8640 × 350 × 1100 | 2 | 11 kW | 22 kW | |
| 2 | Preparation & metering | HDPDA-001 | 9000 × 800 × 800 | 1 | 2.2 kW | 2.2 kW | |
| 3 | Preparation & metering | HDFL-001 | 1.2 m × 1.5 m × 1.4 m | 1 | 0.55 kW | 0.55 kW | |
| 4 | Preparation & metering | HDFL-001 | Ø1310 × H1950 | 1 | 0.55 kW | 0.55 kW | |
| 5 | Preparation & metering | HDSL-001 | Ø1100 × H1140 | 1 | 0.55 kW | 0.55 kW | |
| Panel material mixing | |||||||
| 6 | Panel material mixing | HDKWF1-001 | 1150 × 750 × 1140 | 1 | 7.5 kW | 7.5 kW | |
| 7 | Panel material mixing | HDKY-001 | L1500 × W500 × H2000 mm, air receiver0.8 m³*1 | 1 | 15 kW | 15 kW | |
| Preparation & metering | |||||||
| 8 | Preparation & metering | — | 5000 × 3500 × 1500 | 1 | — | — | |
| Panel material mixing | |||||||
| 9 | Panel material mixing | EPSJB-02 | 3300 × 1700 × 1950 internal chamber: 2184 × 1288 × 1400 | 1 | 22 kW | 22 kW | |
| Cutting & finishing | |||||||
| 10 | Single-gantry horizontal cutter | Cutting & finishing | HDSQ-007 | 6000 × 3400 × 3000 | 1 | 20.9 kW | 20.9 kW |
| Handling & stacking | |||||||
| 11 | Handling & stacking | HDDKG-N01 | 6000 × 3600 × 4700 | 1 | 8.5 kW | 8.5 kW | |
| Cutting & finishing | |||||||
| 12 | Multi-panel slotting machine | Cutting & finishing | HDKG-C02 | 6250 × 3100 × 2400 | 1 | 22 kW | 22 kW |
| Handling & stacking | |||||||
| 13 | Handling & stacking | HDTH-001 | 4800 × 2600 × 3700 | 1 | 6.2 kW | 6.2 kW | |
| 14 | Handling & stacking | HDWEGH1-001 | 3800 × 3350 × 2250 | 1 | 10 kW | 10 kW | |
| 15 | Handling & stacking | HDTH-004 | 6000 × 2600 × 4100 | 1 | 6.2 kW | 6.2 kW | |
| Moulding, curing & circulation | |||||||
| 16 | Moulding, curing & circulation | HDBD-001 | 3 m × 1.5 m | 5 | 1.2 kW | 6 kW | |
| 17 | Moulding, curing & circulation | TM-001 | 12 m × 1.1 m | 1 | 2.2 kW | 2.2 kW | |
| 18 | Moulding, curing & circulation | HM-001 | 12 m × 1.1 m | 1 | 2.2 kW | 2.2 kW | |
| 19 | Moulding, curing & circulation | JZ-001 | 12 m × 1.1 m | 1 | 2.2 kW | 2.2 kW | |
| 20 | Moulding, curing & circulation | HDZD-001 | 12 m × 1.1 m | 1 | 3 kW | 3 kW | |
| PLC, electrical & tooling | |||||||
| 21 | PLC, electrical & tooling | HDKZ1-001 | 1300 × 1100 × 400 | 1 | — | — | |
| 22 | PLC, electrical & tooling | HDCBD1-001 | 700 × 500 × 400 | 1 | — | — | |
| 23 | PLC, electrical & tooling | — | — | 1 | — | — | |
| 24 | PLC, electrical & tooling | — | 600 × 500 × 250 | 5 | — | — | |
| PLC, electrical & tooling | |||||||
| 25 | Production equipment | HDSD2-001 | 3000 × 840 × 630 (complete set) | 1 | — | — | |
| 26 | Production equipment | HDSA-001 | 3000 × 640 × 230 | 1 | — | — | |
| 27 | Wall-panel pull-out tubes | Production equipment | 5 | — | 36 | — | — |
| 28 | Production equipment | — | — | 1 | — | — | |
| 29 | Production equipment | — | — | 1 | — | — | |
| 30 | Production equipment | — | — | 1 set | — | — | |
| 31 | Production equipment | — | — | 1 | — | — | |
PROJECT DELIVERY / TURNKEY SUPPORT
HENGDE connects raw-material testing, factory planning, equipment manufacturing and site commissioning in one delivery plan. Our engineers develop the production route and machine interfaces, and our team prepares operators for production and maintenance. The proposal identifies the equipment, site preparation and services for your factory.
Evaluate representative samples from the project location before selecting the final process.
Adjust the formulation and material ratios against the test results and target product.
Confirm product dimensions and the product-specific preparation, forming, curing and finishing process.
Coordinate land, buildings, storage, material flow, foundations and utilities.
Match capacity, automation, budget, moulds and process interfaces to the agreed factory scope.
Prepare the agreed machines, tooling and controls against the approved configuration.
Check applicable equipment and delivery scope before shipment.
Coordinate packing, loading and destination requirements with the project shipping plan.
Install and connect the agreed equipment after site conditions are ready.
Check machine sequences and trial production with the selected materials.
Train operators in safe use, production sequence and routine maintenance.
Plan maintenance communication and spare-parts support for the installed equipment.
REAL HENGDE PROJECTS
HENGDE projects selected by product family, process route, capacity and current delivery stage.
Xianning, Hubei, China 
Ghana HENGDE connects the panel material system, moulds, reinforcement or facing and curing cycle in one capacity-specific production plan.
Review the approved matrix, process water, reinforcement or facing system and target panel geometry before equipment selection.
Representative samples and product requirements are needed to confirm curing, edge profile, lifting and finished-panel performance.
Testing guides material ratios, dosing, mixing, mould preparation, curing and demoulding for the selected wall panel.
Cutting, slotting, clamping and stacking are then matched to the panel dimensions and handling limits.
Send HENGDE the material sources, available test reports and product you want to manufacture. Our team will define the assessment and trial steps for your production route.
Representative material photographs: cement, Szlomo Lejb / Sumek101; river sand, Krzem Anonim; fly ash, Ablazejo. Licensed under applicable CC BY-SA / GFDL terms. HENGDE project and testing photographs are identified separately.
PROJECT PLANNING
Tell us your target product, project location and planned output. The selected 80 m³/day configuration is included automatically.
