FINISHED WALL PANELS Finished Wall Panel Products
Confirm panel thickness, length, edge profile, surface finish and reinforcement before mould and cutting design.
LIGHTWEIGHT WALL PANELS
Lightweight Wall Panel Applications & Production Requirements
Plan the wall-panel product, raw materials, production process, reinforcement, edge profile and installation requirements before final equipment configuration.
Independent engineeringEquipment manufacturingProject delivery
Lightweight Wall PanelsProduct route
Test firstRaw-material rule
Project-specificFinal specification
01
WALL PANEL APPLICATIONS
From finished panel requirements to production and installation
Use the finished product, cutting method and handling requirements to define the wall-panel equipment configuration.
FINISHED WALL PANELS 
PRODUCTION & CUTTING Wall Panel Production & Cutting
Match mixing, moulding, curing and cutting equipment to the confirmed panel product and production rhythm.
HANDLING & SLOTTING Handling, Slotting & Installation
Plan safe transfer, edge processing, clamping and site installation around the finished panel dimensions.
Wall panel application
See the product in a building
Connect the intended installation method with panel dimensions, edge profiles and handling requirements in your factory plan.
Application reference
Precast wall panel installation
The clip shows work at the top of an interior panel wall, followed by the joined wall surface. Panel size, edge profile, handling and joint details should be defined before equipment selection.
This is an installation reference. The footage alone does not identify the panel formulation or production process.
02
COMPATIBLE PRODUCTS
Product types kept inside this family
Lightweight Wall Panels
Compatible products can share core equipment while using product-specific process modules.
- Lightweight Wall Panels
- Foam Concrete Wall Panels
- EPS Composite Wall Panels
- Ceramsite Wall Panels
- Self-Insulating / Composite Wall Panels
- Special Wall Panel Products
Process route is selected separately
Physical foaming, chemical aeration, EPS and ceramsite processing are selected according to the product and tested raw materials.
03
PRODUCT BASIS
Define the use, specification and required performance first
Use scenarios
Confirm where and how the product will be used.
- Internal partitions in residential and commercial buildings
- Prefabricated wall systems with defined joint and fixing details
- External or higher-performance uses only where the tested wall assembly permits them
Product specifications
Fix the geometry and tolerance basis before machine selection.
- Panel length, width and thickness: project-specific
- Solid, hollow or composite section: confirm before mould and cutting design
- Edge profile and reinforcement: confirm from the installation system
Performance requirements
Published performance claims require applicable product test results and standards.
- Handling strength must suit demoulding, lifting and site installation
- Fire, acoustic and thermal values require tested assemblies
- Surface tolerance and edge accuracy affect installation productivity
04
MATERIAL & PROCESS
Select the route only after the input materials are reviewed
Available raw materials
Representative inputs must be identified and tested.
- Cementitious binder and tested fine mineral input
- Physical foam or lightweight aggregate according to the approved product
- Reinforcement and inserts according to product design
Applicable processes
The formulation and product determine the usable route.
- Batching and physical foaming
- Mould filling, curing and controlled demoulding
- Cutting, slotting, reinforcement handling and finished-panel transfer
05
LINE, EQUIPMENT & CASE
Continue from the application to the production line and equipment
DISCUSS YOUR PROJECT
Discuss Your Wall Panel Project Planning a Lightweight Wall Panel Project?
Tell us your product type, project country, raw materials and target output.
Build the production process around your local materials
HENGDE connects raw-material assessment, sample trials and equipment engineering to develop a practical production route for your factory.
Understand your local materials
HENGDE reviews grading, moisture, composition and supply consistency against the block or panel you want to manufacture.
For recycled or variable inputs, representative samples and production trials establish how that specific source performs.
Turn trial results into a production method
We use the results to develop material ratios, dosing, mixing, forming, curing and finishing requirements.
The equipment proposal then follows the tested process and the required product, rather than a generic machine list.