CLC PHYSICAL-FOAMING LINE
Delivery lead time: 40–50 working days.
PROCESS ROUTEPhysical foaming · Non-autoclaved curing
CLC / foam concrete block production using physical foaming and non-autoclaved curing. Explore the line visual, production stages, equipment configuration, project examples and installation support.
Get a Production Line Proposal
Open full-size imageCAPACITY QUICK INFORMATION
CAPACITY & EQUIPMENT CONFIGURATION
SIX-STEP PROCESS
Meter powder, aggregate and water to the batch formulation.
Generate preformed foam and control its addition to the metered slurry for the target fresh density.
Fill the mould configuration selected for the block product and production capacity.
Match the non-autoclaved curing time, mould count and demoulding condition to the product.
Match billet condition, cutting sequence and transfer speed to the cutting system in this configuration.
Connect block transfer and stacking to the cutting cycle and finished-product storage area.
COMPLETE EQUIPMENT CONFIGURATION
Review the equipment for each production stage. Select an equipment image to enlarge it, or open a linked equipment name for more detail.
| No. | Equipment | Stage | Model | Dimensions | Qty. | Unit power | Total power (kW) |
|---|---|---|---|---|---|---|---|
| Preparation & metering | |||||||
| 1 | Preparation & metering | HDSL-001 | 8640 × 350 × 1100 | 2 | 11 kW | 22 kW | |
| 2 | Preparation & metering | HDPDA-001 | 9000 × 800 × 800 | 1 | 2.2 kW | 2.2 kW | |
| 3 | Preparation & metering | HDFL-001 | 1.2 m × 1.5 m × 1.4 m | 1 | 0.55 kW | 0.55 kW | |
| 4 | Preparation & metering | HDFL-001 | Diameter 1310 × Height 1950 | 1 | 0.55 kW | 0.55 kW | |
| 5 | Preparation & metering | HDSL-001 | Diameter 1100 × Height 1140 | 1 | 0.55 kW | 0.55 kW | |
| Physical foaming & mixing | |||||||
| 6 | Physical foaming & mixing | HDKWF1-001 | 1150 × 750 × 1140 | 1 | 7.5 kW | 7.5 kW | |
| 7 | Physical foaming & mixing | HDKY-001 | Length 1500 × Width 500 × Height 2000 mm Air tank: 0.8 cubic meters × 1 | 1 | 15 kW | 15 kW | |
| Preparation & metering | |||||||
| 8 | Preparation & metering | — | 5000 × 3500 × 1500 | 1 | — | — | |
| Physical foaming & mixing | |||||||
| 9 | Physical foaming & mixing | EPSJB-04 | 3900 × 2000 × 2100 Internal Dimensions: 2580 × 1588 × 1700 | 1 | 22 kW | 22 kW | |
| 10 | Physical foaming & mixing | HDLS-002 | Diameter 1200 mm × Height 2300 mm | 1 | 11 kW | 11 kW | |
| Preparation & metering | |||||||
| 11 | Preparation & metering | HDSU-2 | 2700 × 1400 × 1700 | 1 | 2.2 kW | 2.2 kW | |
| 12 | Preparation & metering | HDBD2-005 | 1700 × 300 × 500 | 1 | 7.5 kW | 7.5 kW | |
| Cutting & finishing | |||||||
| 13 | Cutting & finishing | HDSQ1-003 | 9000 × 3300 × 3650 (High-precision with rotation) | 2 | 30.8 kW | 61.6 kW | |
| 14 | Cutting & finishing | HDOSD1-001 | 3000 × 1000 × 2100 (including power cable) | 2 | 22 kW | 44 kW | |
| Handling & stacking | |||||||
| 15 | Handling & stacking | HDKDR-001 | 4.9 m × 2.8 m × 4.2 m | 1 | 5 kW | 5 kW | |
| 16 | Handling & stacking | HDTH-006 | 4800 × 2600 × 3800 | 2 | 6.2 kW | 12.4 kW | |
| 17 | Handling & stacking | HDTH-005 | 2430 × 1330 × 3900 | 2 | 7.5 kW | 15 kW | |
| Moulding, curing & circulation | |||||||
| 18 | Moulding, curing & circulation | HDBD2-001 | 1800 × 1080 × 400 | 10 | 1.2 kW | 12 kW | |
| 19 | Moulding, curing & circulation | TM-001 | 12 m × 1.1 m | 1 | 2.2 kW | 2.2 kW | |
| 20 | Moulding, curing & circulation | HM-001 | 12 m × 1.1 m | 1 | 2.2 kW | 2.2 kW | |
| 21 | Moulding, curing & circulation | JZ-001 | 12 m × 1.1 m | 1 | 2.2 kW | 2.2 kW | |
| 22 | Moulding, curing & circulation | HDZD-001 | 4 m × 1.1 m | 6 | 0.3 kW | 1.8 kW | |
| 23 | Moulding, curing & circulation | HDZD-002 | 4 m × 1.1 m | 6 | 0.3 kW | 1.8 kW | |
| PLC, electrical & tooling | |||||||
| 24 | PLC, electrical & tooling | HDKZ1-001 | 1300 × 1100 × 400 | 1 | — | — | |
| 25 | PLC, electrical & tooling | HDCBD1-001 | 700 × 500 × 400 | 1 | — | — | |
| 26 | PLC, electrical & tooling | IMPORT | — | 1 | — | — | |
| PLC, electrical & tooling | |||||||
| 27 | Production equipment | HDCM1-002 | 1220 × 1220 × 630 (Complete Set) | 1 | — | — | |
PROJECT DELIVERY / TURNKEY SUPPORT
HENGDE connects raw-material testing, factory planning, equipment manufacturing and site commissioning in one delivery plan. Our engineers develop the production route and machine interfaces, and our team prepares operators for production and maintenance. The proposal identifies the equipment, site preparation and services for your factory.
Evaluate representative samples from the project location before selecting the final process.
Adjust the formulation and material ratios against the test results and target product.
Confirm product dimensions and the product-specific preparation, forming, curing and finishing process.
Coordinate land, buildings, storage, material flow, foundations and utilities.
Match capacity, automation, budget, moulds and process interfaces to the agreed factory scope.
Prepare the agreed machines, tooling and controls against the approved configuration.
Check applicable equipment and delivery scope before shipment.
Coordinate packing, loading and destination requirements with the project shipping plan.
Install and connect the agreed equipment after site conditions are ready.
Check machine sequences and trial production with the selected materials.
Train operators in safe use, production sequence and routine maintenance.
Plan maintenance communication and spare-parts support for the installed equipment.
REAL HENGDE PROJECTS
HENGDE projects selected by product family, process route, capacity and current delivery stage.
Tirana, Albania 
Phnom Penh, Cambodia 
Indonesia HENGDE develops the CLC formulation from your local binder, mineral inputs and process water, then matches foam generation, batching and mixing to this capacity configuration.
HENGDE checks binder and mineral composition, particle grading, moisture and water quality against your block density and strength targets.
For recycled inputs, we define sorting and preparation needs and use representative samples to establish a workable formulation.
Our engineers adjust slurry proportions, water ratio, foam dosage and addition sequence, then check fresh density and mould filling in the trials.
We connect setting and cutting observations to the mould-turnover plan, curing space and downstream handling cycle.
HENGDE plans collection, drainage and settling as a connected recovery loop. We size the recovery area and select pump and return-water arrangements around the cutting process, factory layout and material-test results.
Send HENGDE the material sources, available test reports and product you want to manufacture. Our team will define the assessment and trial steps for your production route.
Representative material photographs: cement, Szlomo Lejb / Sumek101; river sand, Krzem Anonim; fly ash, Ablazejo. Licensed under applicable CC BY-SA / GFDL terms. HENGDE project and testing photographs are identified separately.
PROJECT PLANNING
Tell us your target product, project location and planned output. The selected 600 m³/day configuration is included automatically.
