HENGDE engineers NAAC block lines around chemical aeration and non-autoclaved curing. We connect material formulation, dosing, mixing, mould handling and cutting, backed by equipment experience at the Ordos and Jaiyl customer projects.
Delivery lead time: 40–50 working days.
Prepare the tested mineral and binder inputs, then meter powders and water.
Control aerating-agent dosage, mixing sequence and reaction conditions.
Coordinate mixing and mould filling with the material expansion cycle.
Cure without an autoclave under the project temperature and time controls.
Release the billet at its handling strength and complete the selected cutting or finishing sequence.
Transfer and stack the blocks for continued curing and dispatch.
PRODUCTION LINE GALLERY
Real equipment and product photographs. Scroll through the images; open a photograph to inspect it at full size.
PRODUCTION EQUIPMENT
We match the chemical-aeration NAAC process to your block product, raw materials and output plan. Compare lightweight block production-line routes →
REAL EQUIPMENT PHOTOPreparation & meteringMeasures the confirmed powder input for each production batch.
View device detail →
REAL EQUIPMENT PHOTOPreparation & meteringStores and releases the confirmed water quantity for the controlled batch.
View device detail →
REAL EQUIPMENT PHOTOChemical aeration & mixingCombines the confirmed solids, water and route-specific lightweight constituent according to the approved batch sequence.
View device detail →
REAL EQUIPMENT PHOTOPLC, electrical & toolingForms the listed panel or block billet; final geometry follows the confirmed product.
View device detail →
ENGINEERING DRAWINGPLC, electrical & toolingCoordinates the confirmed line sequence, interlocks, commands and alarms.
View device detail →HENGDE connects raw-material testing, factory planning, equipment manufacturing and site commissioning in one delivery plan. Our engineers develop the production route and machine interfaces, and our team prepares operators for production and maintenance. The proposal identifies the equipment, site preparation and services for your factory.
Evaluate representative samples from the project location before selecting the final process.
Adjust the formulation and material ratios against the test results and target product.
Confirm product dimensions and the product-specific preparation, forming, curing and finishing process.
Coordinate land, buildings, storage, material flow, foundations and utilities.
Match capacity, automation, budget, moulds and process interfaces to the agreed factory scope.
Prepare the agreed machines, tooling and controls against the approved configuration.
Check applicable equipment and delivery scope before shipment.
Coordinate packing, loading and destination requirements with the project shipping plan.
Install and connect the agreed equipment after site conditions are ready.
Check machine sequences and trial production with the selected materials.
Train operators in safe use, production sequence and routine maintenance.
Plan maintenance communication and spare-parts support for the installed equipment.
HENGDE projects selected by product family, process route, capacity and current delivery stage.
Bishkek, Kyrgyzstan 
Jaiyl, Kyrgyzstan 
Ordos, Inner Mongolia, China HENGDE NAAC lines use chemical aeration and non-autoclaved curing. Our engineers coordinate material preparation, reaction control, mould filling and curing around the tested formulation.
Review the confirmed cementitious and siliceous materials, water and project chemical-aeration input before equipment selection.
Lime, gypsum and aluminium powder are included only where the reviewed NAAC engineering route specifies them.
Test results guide dosing, mixing sequence, temperature controls, mould filling and expansion behaviour.
Non-autoclaved curing, demoulding and finishing conditions are confirmed for the selected block and local materials.
HENGDE plans collection, drainage and settling as a connected recovery loop. We size the recovery area and select pump and return-water arrangements around the cutting process, factory layout and material-test results.
Send HENGDE the material sources, available test reports and product you want to manufacture. Our team will define the assessment and trial steps for your production route.
Representative material photographs: cement, Szlomo Lejb / Sumek101; river sand, Krzem Anonim; fly ash, Ablazejo. Licensed under applicable CC BY-SA / GFDL terms. HENGDE project and testing photographs are identified separately.
Discuss your project
A few details give our team the right starting point for your production line proposal.
Delivery lead time: 40–50 working days.
