HENGDE manufactures complete CLC block lines with controlled physical foaming, mixing, mould circulation, cutting and handling. Our engineers connect local-material trials and your output target to the equipment and factory layout.
Delivery lead time: 40–50 working days.
Meter powders, aggregate and water to the working formulation.
Generate preformed foam and control foam dosage, mixing sequence and fresh density.
Fill the block moulds evenly and control casting height.
Hold the moulded material under the project curing conditions.
Release the billet at its cutting condition and cut to the required block dimensions.
Coordinate block transfer, stacking and storage with the production cycle.
PRODUCTION LINE GALLERY
Real equipment and product photographs. Scroll through the images; open a photograph to inspect it at full size.
PRODUCTION EQUIPMENT
We match the physical-foaming CLC process to your block product, raw materials and output plan. Compare lightweight block production-line routes →
REAL EQUIPMENT PHOTOPreparation & meteringMoves compatible powder materials from storage toward the metering section.
View device detail →
REAL EQUIPMENT PHOTOPreparation & meteringMeasures the confirmed powder input for each production batch.
View device detail →
REAL EQUIPMENT PHOTOPreparation & meteringStores and releases the confirmed water quantity for the controlled batch.
View device detail →
REAL EQUIPMENT PHOTOPhysical foaming & mixingPrepares physical foam for a confirmed CLC foam-concrete route; it is not an aluminium-powder NAAC machine.
View device detail →
REAL EQUIPMENT PHOTOPhysical foaming & mixingCombines the confirmed solids, water and route-specific lightweight constituent according to the approved batch sequence.
View device detail →
ENGINEERING DRAWINGPLC, electrical & toolingCoordinates the confirmed line sequence, interlocks, commands and alarms.
View device detail →Share the sources of your proposed binders, mineral materials and process water, together with available test reports or representative sample information. HENGDE uses raw-material assessment to identify trial requirements and evaluate material behaviour under the physical-foaming process. Material names alone cannot confirm a suitable formulation or complete equipment scope.
Provide your intended block dimensions, product requirements and target daily design output. Together with material-trial findings, these inputs guide the connections between preparation, foam generation, mixing, mould circulation, curing, cutting and handling. HENGDE reviews how the selected material and mould arrangement affect downstream transfer and finishing. Each interface requires project-specific confirmation rather than copying a generic configuration.
Describe your proposed factory, available utilities, existing equipment and expected customer-supplied works. Request a configuration-matched equipment schedule that distinguishes included machinery, tooling and controls from optional items and site responsibilities. Capacity and layout planning helps define equipment interfaces. Use the project enquiry page to request a scope review before the final configuration is agreed.
HENGDE connects raw-material testing, factory planning, equipment manufacturing and site commissioning in one delivery plan. Our engineers develop the production route and machine interfaces, and our team prepares operators for production and maintenance. The proposal identifies the equipment, site preparation and services for your factory.
Evaluate representative samples from the project location before selecting the final process.
Adjust the formulation and material ratios against the test results and target product.
Confirm product dimensions and the product-specific preparation, forming, curing and finishing process.
Coordinate land, buildings, storage, material flow, foundations and utilities.
Match capacity, automation, budget, moulds and process interfaces to the agreed factory scope.
Prepare the agreed machines, tooling and controls against the approved configuration.
Check applicable equipment and delivery scope before shipment.
Coordinate packing, loading and destination requirements with the project shipping plan.
Install and connect the agreed equipment after site conditions are ready.
Check machine sequences and trial production with the selected materials.
Train operators in safe use, production sequence and routine maintenance.
Plan maintenance communication and spare-parts support for the installed equipment.
HENGDE projects selected by product family, process route, capacity and current delivery stage.
Tirana, Albania 
Phnom Penh, Cambodia 
Indonesia HENGDE CLC systems combine cementitious and mineral slurry with controlled preformed foam. We use material trials to establish the slurry, foam dosage and mixing sequence for your block.
HENGDE checks binder and mineral composition, particle grading, moisture and water quality against your block density and strength targets.
For recycled inputs, we define sorting and preparation needs and use representative samples to establish a workable formulation.
Our engineers adjust slurry proportions, water ratio, foam dosage and addition sequence, then check fresh density and mould filling in the trials.
We connect setting and cutting observations to the mould-turnover plan, curing space and downstream handling cycle.
HENGDE plans collection, drainage and settling as a connected recovery loop. We size the recovery area and select pump and return-water arrangements around the cutting process, factory layout and material-test results.
Send HENGDE the material sources, available test reports and product you want to manufacture. Our team will define the assessment and trial steps for your production route.
Representative material photographs: cement, Szlomo Lejb / Sumek101; river sand, Krzem Anonim; fly ash, Ablazejo. Licensed under applicable CC BY-SA / GFDL terms. HENGDE project and testing photographs are identified separately.
Discuss your project
A few details give our team the right starting point for your production line proposal.
Delivery lead time: 40–50 working days.
