REAL RETROFIT-SITE PHOTO Mould-rail operation
Moulds move along the retained rail route in the customer factory.
PROJECT CASE
Aksu 100 m³/day simplified self-insulating block retrofit
This Aksu customer selected a simplified 100 m³/day self-insulating-block configuration. HENGDE focused the equipment scope on the required production functions and selected automation around the customer’s initial investment plan.
Independent engineeringEquipment manufacturingProject delivery
REAL AKSU RETROFIT MEDIAA separate simplified-line record from the Aksu customer site
HENGDEProject-specific configuration
01
RETROFIT AT SITE
Mould preparation and the simplified circulation route
REAL RETROFIT-SITE PHOTO REAL PROCESS PHOTO Mould preparation
A separate image records material and mould preparation within the simplified configuration.
REAL LINE PHOTO Mould circulation line
The customer-site media shows the mould line and existing factory rails used by the retrofit.
02
AUTOMATION SCOPE
What the simplified equipment proposal leaves out
To reduce the customer’s initial equipment investment, this simplified proposal omits automatic demoulding and automatic palletizing. Demoulding, transfer and stacking still need to be covered by the retained equipment and factory operating plan. When comparing a simplified and an automated proposal, identify who performs each task and which machines are included. HENGDE defines the retrofit scope around the existing factory and the target self-insulating block product.
03
PLAN YOUR RETROFIT
Match the upgrade to your existing factory
Prepare your existing-equipment list, mould dimensions, factory layout and target block dimensions. These inputs help define retained equipment, new machines and site responsibilities.
01
EPS lightweight-product production
Review the product route, material preparation and equipment stages before choosing a retrofit scope.
02A separate six-metre Aksu retrofit
The six-metre existing AAC-line retrofit is a different project. Its mould length and equipment scope are not part of this simplified 100 m³/day configuration.
03Factory layout and equipment interfaces
Plan the retained rail route, material movement and the interfaces between existing and new equipment.
04Request a matched retrofit proposal
Tell HENGDE your project location, current equipment and target product to discuss the scope for your factory.