SMALL & MEDIUM LINES FIRST
Delivery lead time: 40–50 working days.
Start with HENGDE's 30, 50, 100 and 200 m³/day configurations for small and medium factories. Higher-output project references remain available when the market and factory plan require them.
CHOOSE A CAPACITY
Compare 30, 50, 100 and 200 m³/day design-capacity configurations, then explore larger systems. HENGDE develops the mould circulation, cutting and handling plan around your product and shift schedule.
CLC / foam concrete block production using physical foaming and non-autoclaved curing
CLC / foam concrete block production using physical foaming and non-autoclaved curing
CLC / foam concrete block production using physical foaming and non-autoclaved curing
CLC / foam concrete block production using physical foaming and non-autoclaved curing
CLC / foam concrete block production using physical foaming and non-autoclaved curing
CLC / foam concrete block production using physical foaming and non-autoclaved curing
CLC / foam concrete block production using physical foaming and non-autoclaved curing
CLC / foam concrete block production using physical foaming and non-autoclaved curing
Start with the block your project needs. The information below helps HENGDE review product requirements, material trials, equipment interfaces and preliminary layout needs. Final process and equipment choices depend on project-specific review.
| Project input | What to send | How it shapes the production line |
|---|---|---|
| Wall function and project drawings | Intended wall use, installation location and relevant drawings or specifications provided by your project designer. | These help identify the intended block application, product requirements and handling questions that need clarification. |
| Block dimensions and finish | Target length, width and height; sample photos or drawings showing surface finish and edge profiles. | These guide the review of mould options, cutting arrangements and any finishing equipment required for the selected product. |
| Product tests and applicable standards | Standards and test methods specified for your project, together with available product test reports or requirements from the project designer. | These help identify required test evidence and questions for material or product trials. Equipment selection alone does not demonstrate product compliance. |
| Available raw materials | Proposed binder, mineral material and process-water sources, where applicable, with supplier details, photographs and available material test reports. | These inform sampling requirements and the review of storage, metering, mixing and other process interfaces. |
| Production demand and output basis | Required block types, expected order patterns, target daily design output and proposed operating hours, subject to project confirmation. | These provide a starting point for assessing batching, mixing, mould circulation, curing, cutting and handling capacity, as applicable to the selected production route. |
| Factory and site constraints | Available site plans, usable building dimensions, access routes, utilities and existing equipment. | These help review equipment arrangement, material movement, utility connections and customer-prepared works. |
Review our raw-material assessment service for material-related inputs, and capacity and layout planning for output and site requirements. HENGDE uses the reviewed information to discuss a project-specific equipment supply scope.
PROJECT DELIVERY / TURNKEY SUPPORT
HENGDE connects raw-material testing, factory planning, equipment manufacturing and site commissioning in one delivery plan. Our engineers develop the production route and machine interfaces, and our team prepares operators for production and maintenance. The proposal identifies the equipment, site preparation and services for your factory.
Evaluate representative samples from the project location before selecting the final process.
Adjust the formulation and material ratios against the test results and target product.
Confirm product dimensions and the product-specific preparation, forming, curing and finishing process.
Coordinate land, buildings, storage, material flow, foundations and utilities.
Match capacity, automation, budget, moulds and process interfaces to the agreed factory scope.
Prepare the agreed machines, tooling and controls against the approved configuration.
Check applicable equipment and delivery scope before shipment.
Coordinate packing, loading and destination requirements with the project shipping plan.
Install and connect the agreed equipment after site conditions are ready.
Check machine sequences and trial production with the selected materials.
Train operators in safe use, production sequence and routine maintenance.
Plan maintenance communication and spare-parts support for the installed equipment.
Send your target block, project country, raw materials and planned output. HENGDE will use the complete project form to review the appropriate line direction.
HENGDE connects raw-material assessment, sample trials and equipment engineering to develop a practical production route for your factory.
HENGDE reviews grading, moisture, composition and supply consistency against the block or panel you want to manufacture.
For recycled or variable inputs, representative samples and production trials establish how that specific source performs.
We use the results to develop material ratios, dosing, mixing, forming, curing and finishing requirements.
The equipment proposal then follows the tested process and the required product, rather than a generic machine list.
