Location
Xinjiang, China
HENGDE CUSTOMER PROJECT
Xinjiang Square-to-Long-Mould Block Line Retrofit
HENGDE’s Xinjiang retrofit case documents a move from square moulds towards long mould boxes, alongside changes to the cutting and handling route.
REAL PROJECT MEDIAOriginal image from the HENGDE customer-project record.
HENGDEProject-specific configuration
Xinjiang, ChinaProject location
Self-insulating blocksTarget product
Installation and commissioning documentedPublished stage
01
PROJECT OVERVIEW
Project scope and published evidence
The source identifies cutting consistency, throughput and manual work as concerns on an existing self-insulating block line. The agreed upgrade combined a change in mould arrangement with the cutting process and related automation. The case record includes cooperation, shipment, installation and commissioning sections. These records describe implementation of the retrofit; they do not establish a universal gain in output, a specified tolerance or savings for every factory.
Product direction
Self-insulating blocks
Current published stage
Installation and commissioning documented
02
PROJECT TIMELINE
Documented project stages
Survey and equipment scope
The existing line and its cutting bottlenecks were reviewed before defining the retrofit.
Agreement and shipment
The customer and HENGDE agreed the square-to-long-mould direction and the equipment moved into delivery.
Installation and commissioning
The published record includes installation and factory-commissioning sections. The acceptance basis remains specific to this project.
03
REAL PROJECT MEDIA
Photos from this customer project
REAL PROJECT MEDIA Xinjiang, China project media 1
Real media from this HENGDE customer project.
REAL PROJECT MEDIA Xinjiang, China project media 2
Real media from this HENGDE customer project.
REAL PROJECT MEDIA Xinjiang, China project media 3
Real media from this HENGDE customer project.
04
PRODUCTION & EQUIPMENT SCOPE
Equipment direction documented for this project
Mould arrangement
The project changes from conventional square moulds towards long mould boxes.
Cutting process
The cutting route is upgraded to address the existing line’s reported process limitations.
Factory integration
Retained machinery, transfer positions, foundations and the operating sequence must be coordinated with the new equipment.
DISCUSS YOUR PROJECT
Discuss Your Project Planning a Lightweight Block or Wall Panel Project?
Tell us what you plan to produce and where the factory will be built.